INDUSTRIAL
NANOSOY-PRO
Soap and biodegradable disinfectant for industrial use
NANOSOY-PRO
A raw material of cleaner for the next generation
A raw material of cleaner for the next generation
“Cleaning Power”
“Eco-Friendly”
“Eco-Friendly”
INGREDIENTS:
- Water
- Pine fatty acid
- Ethyleneglycol mono butyl ether
- Sodium hydroxide (pH adjuster)
NOTE : This is an alkaline product
Dilution rate estimate table
- We recommend evaluating each scene and calculating the dilution rate according to the application.
Areas and method of use
- Steel Station: Part cleaning, filter cleaning, rust prevention cleaning, scale removal
- Clean building: Clean up to 30 times to 50 times, apply to floor, ceiling, wall, etc., and rinse with water
- Shipbuilding: Ship engine cleaning, pre-painting cleaning, facility cleaning
- Anticorrosive cleaning: Utilizing liquid properties as a pre-shipment cleaning. It is possible to add rust inhibitors
- Oil treatment: As a degrading agent for industrial water, dilute 5 times to 10 times
- Washing: Washed to about 100 times wash clothes
- Automobiles, Railways: Wash the car body about 100 times thinner. Antibacterial cleaning of floor, glass, toilet, etc.
- Daily cleaning: Cleaning of processing plants, washing of mixers and filling pots, washing drainage ditches and storage tanks
- Agriculture: Cleaning of irrigation tubes including livestock breeding tubes, machines tools, warehouses and washing of storage tanks
Precautions
- Keep out of the reach of children
- Avoid direct sunlight
- Keep at room temperature in the state of stock solution
- Estimated 2 years of shelf life
Note
- As this product contains natural ingredients changes may occur but performance will not be affected
Procedure of use
- NANOSOY-PRO is mainly used for immersion placement.
- Prepare an immersion pool.
- Evaluate by increasing the dilution ratio little by little, 10 times, 20 times, 50 times from the stock solution to 5 times dilution in order.
-
Immersion time was also tested as 10 minutes, 30 minutes, 60 minutes, 2 hours.
※ For washing with the Brownian movement of nano particles (natural movement). -
The water temperature may be room temperature, but it is desirable that 40 ° C to 45 ° C at which fatty acid particles
are most activated. (NG warming above 50 ℃ is not good) - The dilution liquid of the immersion pool has detergency even if it becomes muddy and can be used repeatedly 2 to 3 degrees.
Comparison with Synthetic Detergent
